C24804, C12713, C24803, C13196 Here is a kit we put together so you can do an easy full refresh to your tractor or loaders rear end. This kit is for rear ends on tractors with the wider flared axle tube ends - look at photos. These axles are found on most 1979 and later 200, 400, 3000, 4000 Series  tractors and later 646 and all 648 loaders.   BACKHOE INFO BELOW
(This kit is used on 646 "Backhoes" AFTER Serial Number 9758258 and 648 "Backhoes" UP TO 14014289) 
  For 648 "Backhoes" After Serial Number 14014289, ALL 6018, 6020, 7020 "Backhoes" Go to Our Late Model "Backhoe" Axle Kit HERE)
 
Including all in one kit:
Two C24804 Outer Axle Bushings
Two C12713 Inner Axle Bushings
Two C24803 Axle Seals high quality upgraded seals (as of late we were not happy with Ingersoll provided seals, so we upgraded to these industrial seals)
One C13196 Rear End Cover Gasket
 
OPTION- to add the Hi/Low shift rod Seal
OPTION-  To add Brake Drum Shaft Seal C24803, Outer Bushing C13385, C13241 Inner Bushing.
         (NOTE- On some rears some very light honeing, sanding etc light material removal may be
       needed to install new brake bushings only on some rears.)
OPTION- To Add 2 Axle Retaining "C" Clips 
 
We highly recommend replacing all the axle bushings and seals at the same time. Worn axles, bushings and seals can lead to rearend and or axle failures. There should be little to no up and down or back and fourth play and movement in your axle. Also, there should be no leakage when filled up to rear fill plug height with oil. If you have a failed seal, it is also likely the axle bushings are worn, too, and that's why the seal failed.