LOOK AT PHOTOS FOR CORRECT MULE DRIVE STYLE!
THREE C14768 , TWO C16573 And TWO C24182, Two Cotter Pins Included.
For all EARLY RM38, RM42, RM44/45 and RM48 model/cut width decks used on 316, 318, Odessy 3010, 3012, 3014, 3016, 3018, 3020, 4014, 4016, 4018, 4020, 3100, 4100, 4200, Series tractors With RIGHT HAND discharge decks Models. NOT for 60" decks. Contact us for 60 inch deck kits. THERE WERE 2 STYLE MULE DRIVE BRACKETS USED ON RM DECKS *LOOK AT PHOTOS* To be sure you order the correct kit!
 
This kit is very importantand often over looked. If your mower deck is not lifting as high as you think it should, is not mowing as nice as it should, not floating or riding as it should, not siting level, belt throwing or wearing issues then there is a very good chance your mower mule drive and deck carriage bushings need replacing.
Also inspect all your mounting bolts and pins for any wear and replace as needed as well as the steel mule drive itself and lift brackets, links, pins etc.
We also highly suggest replacing your deck wheels and shoulder bolts as they have a great effect on mower lift and performance. We have an option at check out to add  rear deck wheels and front deck wheels. Also we recommend adding new shoulder bolts as well.
 
OPTION- To add rear deck wheels,  shoulder bolt kit and front wheels. This can make a big differnce with lifting height aw well as mowing quality.
 
OPTION- To Add 2 New Special Self Centering Flat Head Screws #8 in diagram for #9 Bushings
 
NOTE- Some minor material removal may be needed on some bushings in some instances, most times a file or sand paper will do the trick,  if  any material is needed to be removed it is often a very little amount.
 
Watch our video on mower mule drive and carriage rebuilds.   *HERE*
Be sure to check out our mower deck rebuild master kits and our refresh kits.