This is our custom designed HEAVY DUTY Upgrade
drag link for all Case Ingersoll 200, 400, 3000, and 4000 series manual steer garden tractors. It is a direct HEAVY DUTY replacement for C44806 Steering Drag Link: This is the rod between your steering gear and right front spindle. This rod has threaded MALE ENDS. One side is right-hand, one side left-hand thread. We also increased the amount of threads to give you more adjustment if needed in some situations. INCLUDED are 2 new jam nuts. The treads on this rod are the same as all OEM rods were.
As all Case Ingersoll owners know, the tie rods and drag links left a lot to be desired, even with the "improved" versions Case Ingersoll released over the years. Yes, the latest OEM version was much better than the multiple earlier versions. It still is not strong enough as we see many come in every year bent, broke, damaged. These should be 100 percent STRAIGHT! If not, a slight bend greatly affects steering performance and safety! Our rods are much. much stronger and bigger, made from a strong steel formula and with a larger diameter. We feel we found the best size to balance ultimate strength and life but still not too strong or too big where if serious impact or force is put on them that they still will bend before other expensive components will fail first. They need to be rugged and durable but also need to bend before a pricey spindle or steering gear, etc, breaks. This a buy one for the life of the tractor quality rod. At this point, many have replaced at LEAST one but often many drag links and tie rods over the tractors life.... Besides being a performance improvement, they really look great and right at home with the rest of these beefy heavy-duty machines they are a classy perfect match, not out of place or overdone! Also, a perfect pair with our heavy-duty greaseable heim joints!
BE SURE TO CHECK OUT THE MATCHING TIE ROD UP GRADES HERE FOR BIG WHEEL MODELS HERE FOR SMALL WHEEL MODELS
Check out our video on these rods as well as our install videos on rod end installs and full tractor alignment.
For 200/400 and 3000/4000 series tractors - Both long and short frame using part numbers C44806 C14332, C18786, C25857, and others. Replaces shafts with overall length 24'' to 24 1/2'' found on Case Ingersoll Garden Tractors. Can replace C21528 - This rod can be used to replace female threaded drag links, but you will need to buy female threaded rod end joints. We have these available in our full front end upgrade kit as well as at check out. As well as an option here at check out and as a pair in our web store.
OPTION- We recommend you use our upgraded heim joint ends/front end UPGRADE KIT with our joints that replace part numbers C44640 & C44641
OPTION - To add the matching HEAVY DUTY UPGRADE Tie Rod for your machine Big Wheel 400-400 Small Wheel 200-3000 Series!
OPTION - To add new half-moon steering sector gear.
NOTE- Shaft may come unpainted
Due to length, we have to ship item in a larger box
