This is kit style #1: A complete plug-and-play "Selector valve" install kit designed for Case Ingersoll tractors ALREADY equipped with three-point hitches. The three-point hitch is NOT included
 
WHAT DO OUR SELECTOR VALVE KITS DO AND WHAT ARE THEY USED FOR? THEY LET YOU INDEPENDENTLY OPERATE YOUR 3-POINT HITCH FROM YOUR MID/FRONT LIFT HYDRAULICS! WE VERY HIGHLY RECOMMEND THIS ON ANY AND ALL TRACTORS EQUIPPED WITH 3-POINT HITCHES. A MUST-HAVE SO YOU CAN USE BOTH REAR AND FRONT/MID-MOUNTED ATTACHMENTS INDEPENDENTLY!
 
This is Style #1 of two different kit styles we offer based on desired valve and hose routing locations. With this Style, the valve is on the side of the dash tower and the hoses are all routed up vertically to it from under the frame and between floorboard and frame. Please look at photos of both kits before making a choice. Make sure the location of the valve and hose routing will work for YOUR particular tractor as they all vary to some degree.
 
Kit Style #1 is mostly used on Case Ingersoll 200 and 400 series model tractors but some do chose to use them on 3000 and 4000 models. BUT many prefer our Kit Style #3 for Ingersoll 3000 and 4000 series models.
 
Lift the rear attachments when you want, and the front or mid attachments when you want separately instead of both at the same time. Lifting both at the same time without a selector valve is unproductive, frustrating as well as dangerous.
 
This is style #1 of the two styles we offer, again be sure to look at all styles to see which one will work best for you! ALL our kits are designed specifically for Case Ingersoll Garden tractors but can work on other brands however, fitment is not guaranteed and it is up to all buyers to look at the photos, information and to do research before buying.
 
Our kits are plug and play, very simple installs with basic tools and skills. Our kits are made of top-quality parts, no hacking or cutting of the tractor is necessary to install. Nor are there many extra fittings used like in other kits we have encountered where they make the hoses cheaper to save money and create many more connections with adapters that could leak. Depending on what kit number of ours only 2 or 3 holes have to be drilled to end up with a clean professional look that will last a very long time. 
 
All of OUR hoses have expensive swivels on BOTH ends for ease of installation and maintenance. We use the correct expensive hose ends on our hoses so there is no need for extra adapters and joints at the selector valve. In most cases, the other end of the hoses threads right onto your existing tractor fittings. All our fittings are quality fittings/hose ends and made for high hydraulic pressure, NO cheap dangerous pipe fittings here. The hoses are all high quality very flexible high PSI R16 hydraulic hoses and ends.
 
All kits Include one high-quality selector valve, and three high-quality 1/4" hoses made to length for each particular kit install. A cap fitting for the TCV "TEE", a 45-degree and straight fitting that MAY need to be used depending on how your tractor already is set up. Also included - all necessary grade 8 hardware, basic hose protection for exposed portions of the hose as well as zip ties for mounting and securing hoses and hose protection.
 
Basic guidelines and photos for installation are also included. It is up to the buyer to choose the proper qualified person to safely install the kit. Only very basic tools are needed, most installs only require 1/2, 9/16, 5/8, 11/16, and 3/4 wrenches. And possibly basic internal hex style Allen wrenches or sockets to remove plugs in the Selector valve.  Most installs take around 30-90 mins depending on skill.
 
NOTE: Selector Valve Kits can be used for adding additional or auxiliary hydraulic circuits or cylinders, for example, use of dump carts, angle front plow dozer blades, front grapple on bucket loaders, etc.
 
We also offer a three point hitch hose kit, this will be offered as an option at check out - if you would like more details on the three point hitch kit click HERE to get to the listing in our store with full details.When you get the three point kit option with the selector valve there is no bottom cylinder hose in the three point add on kit because you are already getting a custom bottom hose included in the selector valve kit. Three point add on option at check out price reflects this.