C46653 C17404 C25943 Replacement Heavy Duty Upgrade Loader Rod Ends (Steering): RIGHT-HAND THREAD
These are heavy-duty greasable made in the USA Heim joint rod ends for your loader steering system. Rod ends are used on two for the tie rod and two for the drag link on NON-power steering models or one for power steering models.
On SOME loader models IF using this rod end on the power steering cylinder or steering arm end of drag link you MAY have to use spacer and lock washer provided on TOP of steering spindle arm to make sure stud below clears top of axel. (See Photos) Or can trim stud. Answer the question if using for drag link or power steering cylinder and we will include spacer and lock washer.
OPTION- for adding a thin Jam Nut IF ordering for your "Drag Link" On manual steering loader models. As our rod ends can be slighly longer than some year originals, so we reccomend replacing your jam nuts on your drag link with our thnner ones provided. If you are ordering this rod end for "TIE RODs" you do not need them in most cases.
NOTE: Sold individually because depending on model and year you may have one left-hand thread, two left-hand thread ends, or all right-hand thread ends. We highly recommend removing your ends to find out how many right and left-hand ends you need.
