C46463 Our Case Ingersoll Jack Shaft repair kit we put together.
 
Includes this OEM C46463 Jackshaft and welded on 19 tooth sprocket (C46461) is the Upgraded OEM replacement on many 48-inch snow blowers, and snow throwers Also included are two C48649 kits, that include 2 new bearings C28817 (C14414), 4 flange bearing retainers C28277 AND new hardware.
(Look at our Custom upgraded shaft and kit alternative we put together with added benefits and to save you money  https://www.caseingersolltractors.com/product-page/c46463-48-snowcaster-custom-master-rebuild-kit-19-tooth-sprocket-jackshaft 
 
This 19-tooth shaft and kit is used on Case Ingersoll Garden Tractors 200, 3000, 400, and 4000 series models (not 3100 or 4100). This shaft came factory on some RM48 blowers and can be upgraded for increased auger speed on models K84, L84, M84, N84, P84, R84, and S84 Snow Casters AND SB48 Models all With "Roll Pin" Pulley attachment.
You can use this shaft on "J84" Models, but you MUST order the optional Pulley with roll pin attachment.
A Template and instructions are included to update early blowers to be able to use this new style bearing setup as it is the current option for all blowers, some very minor grinding/filling, etc MAY be needed on "some older models" to fit bearings and retainers.
 
New Pulley is recommended on all Jack shaft replacements as they often get damaged when being removed. Also used on some Kubota, Ariens, and Massey Ferguson Snow Blowers Made By Ingersoll.
Save Time and Money by ordering this complete kit and options, we put this kit together to make it easy for you to order and repair with all the needed parts and options to do the job right the first time.
 
NOTE THAT 18 HORSEPOWER AND ABOVE IS RECOMMENDED IF USING YOUR SNOW BLOWER OFTEN IN VERY DEEP OR WET SNOW WITH THIS 19-TOOTH UPGRADED SPROCKET.
 
OPTION- To add OEM Pulley for the jackshaft C31953 and spiral roll pin 138-2040
OPTION - To add OEM Drive Belt For Snow Blower, Choose C23539 for Big Wheel Models 400, 4000, or C23538 For Small Wheel Models 200, 3000 series.
 
OPTION - To add New Drive Chain and AUGER Bearings Kits, select the correct kit for your “Auger” Bearing Style.
           Choose Kit #1 with ROUND AUGER Bearings
C28971 and Correct C46469 Chain for this jackshaft set up. Round bearings came factory equipped on M84,N84,P84,R84,S84, and SB38/48 snow caster augers
 
           If you have HEX AOUGER bearings Choose kit #2 with two C29265 Hex Bearing Replacements and correct C46469 chain for this jackshaft kit. (F84,G84,H84,J84,K84 and L84 snowblowers came factory with "HEX" bearings but these models may have been changed to round bearings over the years so we recommend pulling your "auger" bearings before ordering to confirm!)
 
Look at our listing for part number C31908
for the STANDARD 16 Tooth Jack shaft for many 48-inch snow blowers.
 
NOTE- Pulley Hub location in photos, Hub is "OUT" for 3000 & 4000 Tractors, Hub is "IN" for 200 & 400 Models. 
 
**LOOK FOR OUR VIDEO for installation for this and many repairs on our You Tube channel Case Ingersoll Tractors Northeast  HERE.
 
NOTE- Color and / or finish may vary.