C46462 Our Case Ingersoll Jack Shaft repair kit we put together includes this C46462 Jackshaft and welded-on 19-tooth sprocket (C46461) is the Upgraded OEM replacement used on many 48-inch snow blowers and snow throwers, also included are two C48649 kits, that include 2 new bearings C28817 (C14414), 4 flange bearing retainers C28277 AND New Hardware included.
 
(Look at our Custom upgraded shaft and kit alternative we put together with added benefits and to save you money   https://www.caseingersolltractors.com/product-page/c46462-38-snowcaster-custom-master-rebuild-kit-19-tooth-sprocket-jackshaft
 
 
 
This shaft and kit are used on Case Ingersoll Garden Tractors 200, 3000, 400, and 4000 series models (not 3100 or 4100). This 19-tooth shaft came factory on some RM38 blowers and can be upgraded for increased auger speed on models K80, L80, M80, N80, P80, R80, and S80 Snow Casters AND SB38, and SB42 Models all With "Roll Pin" Pulley attachment.
You can use this shaft on "J80" Models, but you MUST order the optional Pulley with roll pin attachment.
Template and instructions included to update early blowers to be able to use this new style bearing setup as it is the current option for all blowers, some very minor grinding/filing, etc MAY be needed on "some older models" to fit bearings and retainers.
 
A New Pulley is recommended on all Jack shaft replacements as they often get damaged when being removed.
Save Time and Money by ordering this complete kit with options, we put this kit together to make it easy for you to order and repair with all the needed parts and options to do the job right the first time.
 
Also used on some Kubota, Ariens, and Massey Ferguson Snow Blowers Made By Ingersoll.
NOTE: 16 HORSEPOWER AND ABOVE IS RECOMMENDED IF USING YOUR SNOW BLOWER OFTEN IN VERY DEEP OR WET SNOW
 
OPTION - To add OEM Pulley C31953 for the jackshaft
OPTION - To add an OEM Drive Belt For Snow Blower, Choose C23539 for Big Wheel Models 400, 4000, or C23538 For Small Wheel Models 200, and 3000 series.
 
OPTION - To add New Drive Chain and AUGER Bearings Kits, select the correct kit for your “Auger” Bearing Style.
Choose Kit #1 with ROUND AUGER Bearings
C28971 and Correct C46469 Chain for this jackshaft setup. Round bearings came factory equipped on M80,N80,P80,R80,S80, and SB38/48 snow caster augers
Or if you have HEX AUGER bearings Choose kit #2 with two C29265 Hex Bearing Replacements and correct C46469 chain for this jackshaft kit. (F80, G80, H80, J80, K80, and L80 snowblowers came factory with "HEX" bearings but these models may have been changed to round bearings over the years so we recommend pulling your "auger" bearings before ordering to confirm!)
 
Look at our listing for part number C31907 for the STANDARD 16 Tooth Jackshaft for many 38-inch snow blowers.
 
NOTE- Pulley Hub location in photos, Hub is "OUT" for 3000 & 4000 Tractors, Hub is "IN" for 200 & 400 Models. 
 
**LOOK FOR OUR VIDEO for installation for this and many repairs on our YouTube channel Case Ingersoll Tractors Northeast  HERE.
 
NOTE- Color and/or finish may vary.