Our custom in-house 38-inch snow thrower 19 tooth sprocket C46462 replacement kit we designed and put together for Jack Shaft full rebuilds on Case Ingersoll Snow Blowers. To offer an affordable option to OEM parts as well as put together a kit that also offers adjustability and is also serviceable down the road, whereas the OEM setup is not really serviceable since the sprocket is fully welded and pulley and bearings tend to get damaged if and when coming apart and leads to total parts replacement even if only one is failed. With our custom kit here, you get a keyed shaft along with one keyed heavy-duty sprocket AND included in our kit is one keyed heavy-duty pulley (not included in the OEM version kit)
Also, a full jackshaft bearing kit and hardware are included. These kits being keyed allows for adjustment and alignment. These components are heavier-duty than their OEM counterparts and
are priced more affordable. Be sure to watch our videos explaining the kit components as well as their install videos.
 
This kit replaces/upgrades part numbers C46462 Jackshaft, C46461 19 tooth sprocket which is the upgraded replacement used on many 38-inch snow blowers, snow throwers for faster auger speed and throwing, also included are two C48649 kits, that include 2 new bearings C28817 (C14414), 4 flange bearing retainers C28277 AND New Hardware included.
 
This shaft and kit can be used on snowthrowers used on Case Ingersoll Garden Tractors 200, 3000, 400, and 4000 series models (not 3100 or 4100). The 19 tooth shaft option came factory on some RM38 blowers and can be an upgrade for increased auger speed on models J80 K80, L80, M80, N80, P80, R80, S80 Snow Casters AND SB38, SB42 Models
 
Template and instructions included to update early blowers to be able to use the current style bearing setup as it is the current option for all blowers, some very minor grinding/filing, etc MAY be needed on "some older models" to fit bearings and retainers.
 
Save Time and Money by ordering OUR complete custom MASTER kit with options, we put this kit together to make it easy for you to order and repair with all the needed parts and options to do the job right the first time.
 
Also used on some Kubota, Ariens, and Massey Ferguson Snow Blowers Made By Ingersoll.
NOTE: 16 HORSEPOWER AND ABOVE IS RECOMMENDED IF USING YOUR SNOW BLOWER OFTEN IN VERY DEEP OR WET SNOW WITH "19" TOOTH SPROCKET.
 
OPTION - To add an OEM Drive Belt For Snow Blower, Choose C23539 for Big Wheel Models 400, 4000, or C23538 For Small Wheel Models 200, and 3000 series.
 
OPTION - To add New Drive Chain and AUGER Bearings Kits, select the correct kit for your “Auger” Bearing Style.
Choose Kit #1 with ROUND AUGER Bearings
C28971 and Correct C46469 Chain for this jackshaft setup. Round bearings came factory equipped on M80,N80,P80,R80,S80, and SB38/48 snow caster augers
Or if you have HEX AUGER bearings, choose kit #2 with two C29265 Hex Bearing Replacements and the correct C46469 chain for this jackshaft kit. (F80, G80, H80, J80, K80, and L80 snowblowers came factory with "HEX" bearings but these models may have been changed to round bearings over the years so we recommend pulling your "auger" bearings before ordering to confirm!)
 
To Add Mule Drive Full Rebuild Kit For Snow Caster Models Used on 200, 400, 3000, and 4000 series tractors.
 
Be sure to look at our mule drive pivot bushing replacement kits as well.
 
Look at listing Our Custom MASTER Kit for part number C31907 for the STANDARD 16 Tooth Jackshaft for many 38-inch snow blowers.
 
**LOOK FOR OUR VIDEO for installation for this and many repairs on our YouTube channel Case Ingersoll Tractors Northeast HERE.
 
NOTE- Color and/or finish may vary.