C31908 Our complete OEM Case Ingersoll Jack Shaft repair kit we put together.
 
Includes This OEM C31908 Jackshaft and welded on 16 tooth sprocket ( C14579 is the standard OEM replacement on many 48 inch snow blowers, snow throwers
Also included are two C48649 kits, which include 2 new bearings C28817 (C14414), 4 flange bearing retainers C28277 AND new hardware.
 
(Look at our Custom upgraded shaft and kit alternative we put together with added benefits and to save you money https://www.caseingersolltractors.com/product-page/c31908-48-snowcaster-custom-master-rebuild-kit-16-tooth-sprocket-jacksh
This 16 tooth shaft and kit is used on Case Ingersoll Garden Tractors 200, 3000, 400, 4000 series models (not 3100 or 4100). For snowblower models K84, L84, M84, N84, P84, R84, S84 Snow Caster AND SB48 Models With Roll Pin Pulley attachment.
You can use this shaft on "J84" You MUST order the optional Pulley with roll pin attachment.
 
A Template and instructions are included to update early blowers to be able to use this new style bearing set up as it is the current option for all blowers, some very minor grinding/fileing etc MAY be needed on "some older models" to fit bearings and retainers.
 
New Pulley is recommended on all Jack shaft replacements as they often get damaged when being removed.
Save Time and Money by ordering this complete kit with options, we put this kit together to make it easy for you to order and repair with all the needed parts and options to do the job right the first time.
 
Also used on some Kubota, Ariens, and Massey Ferguson Snow Blowers Made By Ingersoll.
 
OPTION - To add OEM Pulley for the jackshaft C31953
OPTION - To Add OEM Drive Belt For Snow Blower, Choose C23539 for Big Wheel Models 400, 4000, or C23538 For Small Wheel Models 200, 3000 series
 
OPTION - To add New Drive Chain and AUGER Bearings Kits, select the correct kit for your “Auger” Bearing Style.
          Choose Kit #1 with ROUND AUGER Bearings
C28971 and Correct C18183 Chain for this jackshaft set up. Round bearings came factory equipped on M84,N84,P84,R84,S84, and SB38/48 snow caster augers
         Or if you have HEX AUGER bearings Choose Kit #2 with two C29265 Hex Bearing Replacements and correct C18183 chain for this jackshaft kit. (F84,G84,H84,J84,K84 and L84 snowblowers came factory with "HEX" bearings but these models may have been changed to round bearings over the years so we recommend pulling your "auger" bearings before ordering to confirm!)
 
Look at our listing for part number C46463
for the upgraded 19 Tooth Jack shaft for faster snowthrower auger speed.
 
NOTE- Pulley Hub location in photos, Hub is "OUT" for 3000 & 4000 Tractors, Hub is "IN" for 200 & 400 Models. 
 
**LOOK FOR OUR VIDEO for installation for this and many repairs on our You Tube channel Case
Ingersoll Tractors Northeast  HERE.
 
NOTE- Color and / or finish may vary.