TWO C18770 Pivot Bushing sleeves are included, as well as new upgraded hardware to do a complete job right the first time. Save time with our kit!
 
This bushing kit is for early snow throwers snowcaster pivot to mounting frame bracket.
Look at photos of bushings to see if these are the ones you need. Used on blower models H80, H84, J80, J84, K80, K84, L80, L84
 
NOTE- If you have one of the models listed here, BUT had the newer C25565 bracket as a replacement for your mule bracket on an early machine, then you will need our kit that includes C25580.
 
If you have snow caster models M80, M84, N80, N84, P80, P84, R80, R84, S80, S84 and SB38, SB48 & variant's. You need our kit with Part Number C25580
 
The bushings are often overlooked or not known about. If your blower does not lift as high as it should, has right and left or fore and aft movement and play it is a great possibility that these bushings are worn or often missing! We include new grade 8 bolts as well. Most times, if the bushings are worn, the bolts are too, and no sense, just replacing bushings if the bolts are not true. There are many mounting and points of contact that can wear on your blower to cause play and not lift to full height or operation issues. But these bushing and bolts are often the major cause and the first parts we recommend replacing.
 
OPTION- We highly recommend adding our full mule drive rebuild kit that includes 2 new pulleys, spring, arm bushing, and new hardware for a complete lasting repair. Save Time And Money with this full kit addition! For more info on this snowcaster mule drive rebuild kit, check out our listing for it.
 
Do not forget your new belt as well! And all of our multiple snow blower kits and options!
 
**LOOK FOR OUR VIDEO for installation for this and many repairs on our YouTube channel Case Ingersoll Tractors Northeast HERE.