C17337 Loader Arm Assembly Mount Rod Used On 600, 6000, 7000 Loaders & Backhoes. This rod goes through your loader arms and into tractor frame/loader sub frame and is where your load piviots. We use a strong and harder steel rod that wears well as long as greased as it should be. We include two new roll pins for your exsiting collars and we add two grade 8 spacers that will help keep arms centered and act like bears between loader arms and frame. 
Part numbers C17337, C44068, C12975
 
NOTE/INSTALL TIPS- You will NEED to drill the 1/4" holes for the two roll pins. We leave the shafts undrilled for a reason. Many times we find by this time in the loaders life the arms show signs of wear and use and many are often sprung slighly or have been repaired and present some side load force or can be un even from side to side.  It is not good to have pressure and stress on the arms constantly. So we reccomend putting the spacers provided between the arms and frame. Then center the loader on the rod so roughly the same distance is between on both sides. Next place your collars tight to arms on both sides and mark/drill the holes straight for the 1/4" roll pins. Lube all parts before assembly as well as after with the greasefitting in loader arm bushings.  Also when loaders arms are off its a great time to inspect and  look for andy damnage or wear and have repaired by a qualified person. 
 
This item ships oversize due to length.