C48638, C48640 PLUS Master Banana Plate Repair Kit for Case Ingersoll Loaders & Backhoes
This is a true master kit that is complete. Our mMASTER kit here that we have put together has numerous more parts than what is included in some of the basic C48638, C48640 style kits. To truly do this job correctly all these parts should be replaced and by doing so, it will make your banana plate components last longer compared to just replacing a handful of parts that many seem to do with unsatisfying results with the longevity of their repair.
We specially put this kit together to make it simple to have a plug and play kit with all the necessary components, minus the lever, to do a true full rebuild on your travel directional linkage. Some parts we have replaced with more heavy duty components or components we have found that work better, for instance the spring that we included can have the length of it adjusted to change the feel/resistance of your travel pedal to your liking. This kit will come with all the needed parts in order to repair your Banana plate back to factory operation. If your Case Ingersoll Loader's travel pedal operation is slow, jumps out of the traveling direction, "sticks in gear", faster in one direction or the other, or is slow to respond, etc. this is the kit you need to fix your travel issues.
INFO and INSTALL Video HERE- https://youtu.be/oj_duvbQQLg?si=tDEIdA-4fyR0_D0w
Included with this kit will be the following OEM parts and or replacements/upgrades for part numbers below:
C29801 ARM
C29764 BUSHING
C29800 BUSHING
132-334 COTTER PIN
192-20 LOCK WASHER
C26424 ROD PEDAL CONTROL
129-102 NUT
C18277 SPRING PEDAL RETURN
C17551 DISC - FRICTION
C26266 BUSHING - NYLON
C18277 WASHER - SPRING
195-533 WASHER
131-165 NUT
129-37 NUT
C29765 BRACKET GUIDE
113-103 BOLT
131-176 NUT
C29803 ROD
195-518 WASHER
195-521 WASHER
C19025 BALL JOINT
129-122 NUT
132-320 COTTER
132-333 COTTER
353-442 BUSHING
C19376 SPACER
C19377 SPACER
UPGRADED Extra Large Spacer Washer
192-18 LOCK WASHER
182-528 SCREW
113-102 BOLT
129-102 NUT
193-29 LOCK WASHER
C23514 FOLLOWER- CAM
This kit will work on 648 (after serial number 14098393) 6018, 6020, and 7020 Case Ingersoll Models loaders and backhoes. If all parts in the kit are used and replaced it should also work on almost all early 648, 646, and 644 loaders and backhoes too. This kit will convert them to the newer style components. Extremely early 644, 646 machines you may have to reuse your travel control valve rod with the rest of the components included in this kit. Banana Plates/Arm/Cam/Brackets etc. included in this kit replace or are used in place of the possible following part numbers C17555; C17552; C21512; C19902; C18012; C22986; C22915; C 29801; C33315
SHOP TIP- Look at photos, 3 nylon bushings are included in our kit. There is 1 small one that is packaged with the Bellville Spring washer, Nylon lock nut and heavy duty 5/8 washer. This is the lever lower bushing that mounts in lower lever mount inside friction disk. The other 2 nylon bushings are for the lever top inside the dash. Use the "one" that fits the tightest for your model and its condition. You may need to place needle nose pliers across the top of it and tap in with hammer for a tight fit. The new bracket for the banana plate bracket is set up for later style safety switches, Depending on year and model you may have to change position of switch and what terminals the plug is connected to on switch. On early models you may have to upgrade to the newer style switches that mounts on this updated bracket. Look at photos.
Also we provide a larger spacer washer (#26 - #27 in parts diagram) that goes above the Banana plate and pins over the directional travel lever rod taht rides in the slot of plate and the follower is mounted on. Thsi larger washer performs better and eliminates any binding or chance of spacers wedging.
