Possible OEM part numbers that this kit replaces- C25369, C25368, 218-5479, C17188, C17189, 218-5291, and others3-point hitch INSTALL KIT for Case Ingersoll three-point hitches.
Includes TWO "SWIVEL" TEE fittings, and TWO straight adapter fitting. This Kit Includes TWO high-quality 1/4" strong industrial very flexible high PSI hoses.
Unlike some other kits and replacement hoses, ours have SWIVELS on BOTH ends of each hose. This is done for easy installation and replacement many years down the road. One hose is for the top of the 3PT lift Cylinder and one for the bottom.
OPTION- To add a 3 point cylinder reseal/rebuild kit.
WE HIGHLY RECOMMEND THE ADDITION OF OUR SELECTOR VALVE KIT WITH ANY THREE-POINT HITCH. WITH THE INSTALLATION OF THIS ADDITIONAL KIT, YOU CAN INDEPENDENTLY OPERATE YOUR REARHYDRAULICS SEPARATELY FROM YOUR MID/FRONT HYDRAULIC LIFT. For more information/details on the selector valve kits click the following links to get to the two kit we offer:
They each then run to the travel control valve and "Tee" into the existing fittings with the supplied "T" fittings where your mid lift belly cylinder is currently hooked up. The fittings provided are of the swivel type and high quality. The importance of the "swivel" option is that you can simply plug & play. Just unhook your mid-lift belly cylinder lines at the travel valve and screw these T fittings right to them straight up and down.
Unlike some other kits and some factory options where you have to remove multiple lines and fittings in order to thread in the non-swivel TEE fittings into the base of the travel control valve. With our kit, none of that is necessary. The straight adapter fitting is used only for SOME installs, mostly for H26, J26, and LT26 hitch install. It is inserted into the top of the 3-point hitch cylinder.
Only very basic tools are needed, most installs only require 9/16, 5/8, and 11/16 wrenches. Most time the time to install is only 30-60 mins at most. We provide some tips if you choose to use them to secure and mount your lines as a basic option.
This is our kit that we use to install HH34, HH60 and H26, J26 LT26 3-point hitches on most models from CASE INGERSOLL from the 200, 400, 600, 3000, and 4000, 6000, 7000 series tractors and their sub-models.
Being that they do fit many models including small and big tire models as well as long and short frame, loader tractors, and multiple Case Ingersoll 3-point hitch models, there may be some slack/extra length to one or both hoses or there may be little to none at all.
We have yet to have an issue using this kit on any Model Case Ingersoll. The way you choose to route, hang, tie, and secure your hoses will also determine the amount of slack that is in the lines as there are many options as to how to do this.
NOTE: When choosing a route, make sure the hoses are clear of any moving parts, linkages, etc. Also, make sure the hoses are free from rubbing or wear points.
You make to make sure to keep them from rubbing anything as much as possible. Photos are just some examples to help have an Idea of installs.
The hoses and fittings are high quality and NOT the economy cheap ones that do not last long.
